when installing magisk its not installing. #137

New Issue

Open

opened 2023-12-04 11:18:34 -05:00 by SuperErnD · 21 comments

SuperErnD commented 2023-12-04 11:18:34 -05:00 (Migrated from github.com)

Copy Link

Copy Source

when installing magisk its not installing. script dont give any errors
linux kernel - 6.6.2-cb2.0.fc39.x86_64
distro - fedora 39 workstation

 when installing magisk its not installing. script dont give any errors linux kernel - 6.6.2-cb2.0.fc39.x86_64 distro - fedora 39 workstation

👍 1

mistrmochov commented 2023-12-04 15:22:38 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Same here on archlinux with linux-zen kernel. Tried also with linux-xanmod-anbox kernel, that didn't work either.

Same here on archlinux with linux-zen kernel. Tried also with linux-xanmod-anbox kernel, that didn't work either.

casualsnek commented 2023-12-05 03:53:22 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Click on the install button on the magisk app.
1. On the subsequent screen, select the option “Direct install into system partition.“
4. Click on the “Let’s go” button located next to the selected option.
5. When it’s done, click the “Restart” button shown at the bottom right.
If this does not work as well let me know !

Click on the install button on the magisk app. 1. On the subsequent screen, select the option “Direct install into system partition.“ 4. Click on the “Let’s go” button located next to the selected option. 5. When it’s done, click the “Restart” button shown at the bottom right. If this does not work as well let me know !

mistrmochov commented 2023-12-05 06:45:05 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Hi, thanks for you reply ^^
Howewer these options aren't here at all, It seems like It completle failed to root It. I don't know If I'm doing something wrong.
Tried already on Debian, Fedora and Arch, while distro hoping.

Hi, thanks for you reply ^^ Howewer these options aren't here at all, It seems like It completle failed to root It. I don't know If I'm doing something wrong. Tried already on Debian, Fedora and Arch, while distro hoping.

SuperErnD commented 2023-12-05 11:21:04 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Click on the install button on the magisk app. 1. On the subsequent screen, select the option “Direct install into system partition.“ 4. Click on the “Let’s go” button located next to the selected option. 5. When it’s done, click the “Restart” button shown at the bottom right. If this does not work as well let me know !

i dont have a direct install into ...., i have only patch boot image

> Click on the install button on the magisk app. 1. On the subsequent screen, select the option “Direct install into system partition.“ 4. Click on the “Let’s go” button located next to the selected option. 5. When it’s done, click the “Restart” button shown at the bottom right. If this does not work as well let me know !  i dont have a direct install into ...., i have only patch boot image

❤️ 2

0a00 commented 2023-12-08 06:52:57 -05:00 (Migrated from github.com)

Copy Link

Copy Source

I don't have this option in my environment either,

I don't have this option in my environment either, 

iFlxy commented 2023-12-14 17:46:00 -05:00 (Migrated from github.com)

Copy Link

Copy Source

I'm having the same issue.

I'm having the same issue.

MakandaDEV commented 2023-12-18 07:59:01 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Same Issue @casualsnek. It seems your Magisk script is outdated.

Same Issue @casualsnek. It seems your Magisk script is outdated.

ryanrudolfoba commented 2023-12-21 11:55:22 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Same behavior for me on Fedora install.

Same behavior for me on Fedora install.

blacklightpy commented 2023-12-21 12:47:53 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Same here on Void Linux

Same here on Void Linux

mistrmochov commented 2023-12-21 14:50:37 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Unfortunately It doesn't work on any liznux distribution.
You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid

Unfortunately It doesn't work on any liznux distribution. You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid

ryanrudolfoba commented 2023-12-22 15:00:48 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Unfortunately It doesn't work on any liznux distribution. You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid

i tried yours the other day and it didnt work either. gonna try again on an older lineageos build from Nov / early Dec

> Unfortunately It doesn't work on any liznux distribution. You can go with my script temporarily https://github.com/mistrmochov/magiskWaydroid i tried yours the other day and it didnt work either. gonna try again on an older lineageos build from Nov / early Dec

casualsnek commented 2023-12-31 22:12:36 -05:00 (Migrated from github.com)

Copy Link

Copy Source

Thanks for reporting, latest magisk-delta has some issues starting on magisk. I will try downgrading magisk to get it working at the moment, till i find a way to get latest builds working again !

Thanks for reporting, latest magisk-delta has some issues starting on magisk. I will try downgrading magisk to get it working at the moment, till i find a way to get latest builds working again !

casualsnek commented 2024-01-08 22:55:08 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

It's downgraded now ! Magisk should work now. Can you test it ?

Techwizz-somboo commented 2024-01-12 01:36:49 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

> It's downgraded now ! Magisk should work now. Can you test it ? I just tried. Having the same problem as everyone else listed above.

casualsnek commented 2024-01-12 08:19:45 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

> > It's downgraded now ! Magisk should work now. Can you test it ? > > I just tried. Having the same problem as everyone else listed above. If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

Techwizz-somboo commented 2024-01-12 12:17:48 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

> > > It's downgraded now ! Magisk should work now. Can you test it ? > > > > > > I just tried. Having the same problem as everyone else listed above. > > If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while ! It was a brand new installation

casualsnek commented 2024-01-12 22:46:24 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

> > > > It's downgraded now ! Magisk should work now. Can you test it ? > > > > > > > > > I just tried. Having the same problem as everyone else listed above. > > > > > > If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while ! > > It was a brand new installation Weird ! Can you share output of ``cat /proc/cmdline`` and ``uname -r`` ?

Techwizz-somboo commented 2024-01-13 01:00:01 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox

> > > > > It's downgraded now ! Magisk should work now. Can you test it ? > > > > > > > > > > > > I just tried. Having the same problem as everyone else listed above. > > > > > > > > > If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while ! > > > > > > It was a brand new installation > > Weird ! Can you share output of `cat /proc/cmdline` and `uname -r` ? For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox

casualsnek commented 2024-01-13 03:17:39 -05:00 (Migrated from github.com)

Copy Link

Copy Source

It's downgraded now ! Magisk should work now. Can you test it ?

I just tried. Having the same problem as everyone else listed above.

If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while !

It was a brand new installation

Weird ! Can you share output of cat /proc/cmdline and uname -r ?

For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox

Yes, xanmod is must with psi=1 kernel parameter to get magisk running on waydroid on Arch !

> > > > > > It's downgraded now ! Magisk should work now. Can you test it ? > > > > > > > > > > > > > > > I just tried. Having the same problem as everyone else listed above. > > > > > > > > > > > > If you did a dirty downgrade (downgrade while you previously installed magisk.. You'll need to clean up some files for downgrade to work). I will share a write-up with instruction here after a while ! > > > > > > > > > It was a brand new installation > > > > > > Weird ! Can you share output of `cat /proc/cmdline` and `uname -r` ? > > For me the solution was to swap to this kernel. So probably not a problem with your script https://aur.archlinux.org/packages/linux-xanmod-anbox Yes, xanmod is must with psi=1 kernel parameter to get magisk running on waydroid on Arch !

❤️ 1

baptx commented 2024-01-16 07:56:06 -05:00 (Migrated from github.com)

Copy Link

Copy Source

I got Magisk installed and Zygisk enabled here:
https://github.com/casualsnek/waydroid_script/pull/143#issuecomment-1893679352

I got Magisk installed and Zygisk enabled here: https://github.com/casualsnek/waydroid_script/pull/143#issuecomment-1893679352

🚀 1

AlecBlance commented 2024-03-29 07:50:59 -04:00 (Migrated from github.com)

Copy Link

Copy Source

I got Magisk installed and Zygisk enabled here: #143 (comment)

Thanks! I got my Zygisk this way. For now, this will suffice but, it'd be good if we will have the latest magisk-delta. Hopefully, they will sort it out.

> I got Magisk installed and Zygisk enabled here: [#143 (comment)](https://github.com/casualsnek/waydroid_script/pull/143#issuecomment-1893679352) Thanks! I got my Zygisk this way. For now, this will suffice but, it'd be good if we will have the latest magisk-delta. Hopefully, they will sort it out.

Sign in to join this conversation.

No Branch/Tag Specified

Branches Tags

main

MisterWizzard/fix/magisk-data-adb-permissions

JonasAlv/main

sr00t3d/feature/tflite-crash-fix

EsymDnB/main

LmanTW/main

SoulInfernoDE/main

MarSoft/patch-1

Alistair1231/inline-dependencies

porkboi/patch-1

i-am-very-smart/main

Kazevic/patch-1

lolmc0587/main

SteavenGamerYT/patch-1

rduttshukla/feat/smartdock-update-and-permission-fix

agilgur5/perf-clone-depth

Ryhon0/main

AndyKhang404/patch-1

noobhacker1/main

ios7jbpro/patch-1

TannerSchultz2006/main

EliasTheGrandMasterOfMistakes/patch-1

arjun-234/main

xuzhen/patch-1

Quackdoc/patch-1

jo-so/readme

Quackdoc/patch-2

creeloper27/main

brccabral/patch-1

No results found.

Labels

No items

No labels

Milestone

No items

No Milestone

Projects

Clear projects

No projects

Assignees

Clear assignees

wbruno (William L. Bruno)

No Assignees

1 Participants

Notifications

Subscribe

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: wbruno/waydroid_script#137